Tellaboull FÜR Pixhawk PX4 PIX 2.4.8 500MW Flight Controller mit Telemetrie + M8N GPS + Mini OSD + PM + Sicherheitsschalter + Summer + PPM + I2C für RC-Drohne
von Tellaboull
Marke
Tellaboull
Specifications:
Name:Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller
Size: 15cm x 18cm x 15cm
Microprocessor
1.32 2 MB flash STM32F427 Cortex M4, with hardware floating-point processing unit
2. frequency: 168MHZ, 256K RAM
3.32 STM32F103 backup coprocessor
Sensor
1.L3GD20 3-axis digital gyroscope 16
2.LSM303D 3-axis accelerometer 14 / Magnetometer
3.MPU6000 6-axis accelerometer / magnetometer
4.MS5611 precision barometer
Interface
1 .5 high voltage compatible UART 1, 2 with hardware flow control
2. 2 CAN
3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input
4.Futaba SBUS compatible inputs and outputs
5.PPM Signal Input
6.RSSI (PWM or voltage) Input
7.I2C
8.SPI
9.3.3 and 6.6VADC input
10. External MICRO USB Interface
Package information:
Package size:200x250x230mm/8x10x9.2in
Package weight:310g/10.85oz
Package Included:
1xPixhawk 2.4.8 32bit ARM Flight Controller
1xSafety button and buzzer ( 2 kinds of design send at random)
1xRGB
1x8G TF card (IO firmware has written)
1xNeo-M8N Gps Module
1xBlack Gps Holder
1xPower Module ( yellow and black color XT60 connector PM send at random
1xMinim OSD w/ shell ( 2 kind of OSD cable send at random)
1xI2C Splitter Expand Module
1xPPM Module w/ shell
1x433/915 MHZ telemetry ( send as your choice)
1x6pin turn 6pin cable
1x4pin turn 4pin cable
1x3pin DuPont line
NOTE:
Before connect with the computer, you need to insert the SD card first , then flash the program, otherwise the LED indicator will not
light up.
Please make sure you read these wikis and videos before you use.
And did not just connect then say ""LED Indicator not flash"" or not calibrate well then open dispute.
Name:Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller
Size: 15cm x 18cm x 15cm
Microprocessor
1.32 2 MB flash STM32F427 Cortex M4, with hardware floating-point processing unit
2. frequency: 168MHZ, 256K RAM
3.32 STM32F103 backup coprocessor
Sensor
1.L3GD20 3-axis digital gyroscope 16
2.LSM303D 3-axis accelerometer 14 / Magnetometer
3.MPU6000 6-axis accelerometer / magnetometer
4.MS5611 precision barometer
Interface
1 .5 high voltage compatible UART 1, 2 with hardware flow control
2. 2 CAN
3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input
4.Futaba SBUS compatible inputs and outputs
5.PPM Signal Input
6.RSSI (PWM or voltage) Input
7.I2C
8.SPI
9.3.3 and 6.6VADC input
10. External MICRO USB Interface
Package information:
Package size:200x250x230mm/8x10x9.2in
Package weight:310g/10.85oz
Package Included:
1xPixhawk 2.4.8 32bit ARM Flight Controller
1xSafety button and buzzer ( 2 kinds of design send at random)
1xRGB
1x8G TF card (IO firmware has written)
1xNeo-M8N Gps Module
1xBlack Gps Holder
1xPower Module ( yellow and black color XT60 connector PM send at random
1xMinim OSD w/ shell ( 2 kind of OSD cable send at random)
1xI2C Splitter Expand Module
1xPPM Module w/ shell
1x433/915 MHZ telemetry ( send as your choice)
1x6pin turn 6pin cable
1x4pin turn 4pin cable
1x3pin DuPont line
NOTE:
Before connect with the computer, you need to insert the SD card first , then flash the program, otherwise the LED indicator will not
light up.
Please make sure you read these wikis and videos before you use.
And did not just connect then say ""LED Indicator not flash"" or not calibrate well then open dispute.
Angebote werden geladen ...
...
* Alle Preise inkl. Mehrwertsteuer. Die Preise und Versandkosten können sich seit der letzten Aktualisierung verändert haben. Es ist technisch nicht möglich, die angegebenen Preise in Echtzeit zu aktualisieren. Es gilt der Preis zum Zeitpunkt des Kaufs auf der Website des Verkäufers. Als Amazon-Partner verdient die metaspinner net GmbH an qualifizierten Verkäufen.